Table of Contents
Advertisement
3. After turning on the main switch, the LED
displays of the shutter speed and f/stop will
visually appear within the viewfinder by a slight
depressing of the shutter release button;
additional pressure upon the shutter will cause
the same to release for shooting.
Visual warnings during Aperture-priority AE
control:
The following indication will manifest itself within
the viewfinder if the given photographic situation
exceeds the shutter/aperture coupling range. The
shutter speed will appear as follows:
/qod
IS"
—►
fOCiC*
(flow-like
_
flickering)
If the maximum aperture (f/2.8, etc.) appears, it
should be reset by moving the same toward the
direction of the minimum aperture If/22, etc.).
The process should be reversed in the similar
manner, when the displayed value is the minimum
aperture (f/22, etc.) by changing the aperture
in the direction of maximum aperture.
Should the situation return to normal, that is,
within the shutter/aperture coupling range by
changing the f/stop, the flow-like flickering will
cease and proper exposure is indicated and
photographs may be taken in this AE mode.
Whenever the situation exceeds the meter coupling
range for proper exposure, the following shutter
speed/aperture value indications will appear:
.
(flow-like
F^B
flickering)
ioOQ
. ' /ITH-TCI -
(Please refer to the section concerning "Beyond
meter couDlina ranae". page 27.)
37
Advertisement
Table of Contents
