Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sonodyne SSW 2020
Summary of Contents for Sonodyne SSW 2020
- Page 1 SSW 2020 front firing powered subwoofer owners manual •...
- Page 2 INTRODUCTION • UNPACKING INTRODUCTION The SSW 2020 is a stereo passive subwoofer with both direct (4 Ohm) and 70/100V input, and a pair of highpass outputs for satellite speakers. 80W are available, by connecting to the respective input terminal. Selection between inputs (direct and 70/100V) is carried out with a slide switch.
- Page 3 DIMENSION • 480.0 mm 225.0 mm SSW 2020 • page 2...
- Page 4 The wall mount bracket of SSW 2020 consists of 2 parts - one that is fitted to the cabinet and the other part a fish-plate and 2 screws, for transit purposes. First open the 4 screws, and remove the plate. Please see Fig.1 below...
- Page 5 Lower the cabinet so that the pins on the cabinet bracket engage with the corresponding holes on the wall bracket. Please see Fig. 4 below STEP 3: MOUNT THE CABINET FIG. 4 SSW 2020 • page 4...
- Page 6 REAR VIEW SSW 2020 • page 5...
- Page 7 This is a slide switch for input selection. When connecting the 4 Ohm speaker output of your amplifier to the input of the SSW 2020, keep the switch in DIRECT mode. When connecting the 70V or 100V output of your amplifier, keep it in 70/100V position.
- Page 8 Wall-mounting brackets NET WEIGHT 15.5kg GROSS WEIGHT 17.1kg NOTE: Due to continuous improvements, all specifications are subject to change SONODYNE, India • H.O.: 98 NB Block E New Alipore, Kolkata 700053 sonodyneoffici al SonodyneMus ic sonodyneofficial +91 9830855260 response@sonodyne.com www.sonodyne.com...
Need help?
Do you have a question about the SSW 2020 and is the answer not in the manual?
Questions and answers