Advertisement
Advertisement
Table of Contents
Related Manuals for Sonodyne SSW Series
Summary of Contents for Sonodyne SSW Series
- Page 1 SSW 2010 front firing powered subwoofer • owners manual www.sonodyne.com...
- Page 2 INTRODUCTION • UNPACKING INTRODUCTION The SSW 2010 is a stereo passive subwoofer with both direct (4 Ohm) and 70/100V input, and a pair of highpass outputs for satellite speakers. With 70V input, 3 different power taps are available: 7.5W, 15W and 30W. With 100V input,15W, 30W and 60W are available, by connecting to the respective input terminal.
- Page 3 DIMENSION • PRODUCT DRAWING SSW 3010 SSW 2010 • page 2...
- Page 4 MOUNTING The SSW 2010 comes fitted with wall mount brackets so that you can hang it on the wall. Please follow the steps given below The wall mount bracket of SSW 2010 consists of 2 parts - one that is fitted to the cabinet and the other part to be fitted on the wall.
- Page 5 MOUNTING Hold the cabinet vertically and align it, so that the tongue of the cabinet bracket is just above the groove on the wall bracket. Lower the cabinet so that the pins on the cabinet bracket engage with the corresponding holes on the wall bracket.
- Page 6 REAR VIEW SSW 2010 SSW 2010 • page 5...
- Page 7 REAR VIEW INPUT SELECT SWITCH This is a slide switch for input selection. When connecting the 4 Ohm speaker output of your amplifier to the input of the SSW 2010, keep the switch in DIRECT mode. When connecting the 70V or 100V output of your amplifier, keep it in 70/100V position.
- Page 8 NET WEIGHT 12.2kg GROSS WEIGHT 14.7kg NOTE: Due to continuous improvements, all specifications are subject to change SONODYNE, India • H.O.: 98 NB Block E New Alipore, Kolkata 700053 A product of the Mukherjee Innovation Centre sonodyneofficial SonodyneMusic sonodyneofficial +91 9830855260 response@sonodyne.com...
Need help?
Do you have a question about the SSW Series and is the answer not in the manual?
Questions and answers