Subscribe to Our Youtube Channel
Related Manuals for 1 BY ONE 1-AD07US01
Summary of Contents for 1 BY ONE 1-AD07US01
- Page 1 Belt Drive Turntable System 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 Instruction Manual www.1byonebros.com Made in China...
-
Page 2: Safety Instructions
Introduction Thank you for purchasing the 1byone Belt Drive Turntable System. This instruction manual contains important information about its safety, usage and disposal. Use the product as described and keep this manual for future reference. If you sell this turntable or pass it on, please also give this manual to the new owner. Safety Instructions Read and understand this entire manual before using this product. -
Page 3: Product Description
Product Description 11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block 1. Counterweight or cover these openings. 2. Anti-skating Stick 12. Unplug the product during lightning storms or when unused for long periods of 3. -
Page 4: Installing The Turntable
This turntable is supplied with a factory-fitted cartridge that’s already adjusted. 2. Set the platter on the spindle. Note: Instructions provided in this manual for adjusting the cartridge are provided in • Make sure that the platter is fully seated on the spindle. case the cartridge is replaced at a later date by a different model. -
Page 5: Rotating The Platter
Rotating the Platter down. Perform this adjustment carefully. Counterweight Tonearm 1. Using your hands, slowly rotate Figure 1 the platter ten times in a clockwise direction (Figure 1). 2. This step is for resetting the auto mechanism, getting rid of any twists in the belt and making sure the belt rides Adjust so the tonearm is level smoothly along the drive rim on the... -
Page 6: Anti-Skating Force Adjustment
Anti-skating Force Adjustment Setting Phono-Line Out Switch The anti-skating force must be adjusted corresponding to the tracking force as follows: This product has a built-in phono equalizer function. You can use the turntable, even if you do not have a phono amplifier or connectable equipment with a built-in phono Tracking Force Groove in the stub amplifier. -
Page 7: Power Management Function
Power Management Function Bluetooth Indicator Bluetooth Stauts Flash Auto searching and pairing The turntable will automatically go into standby mode after 20 minutes of inactivity. Solid Paired successfully To resume operation, simply press the power switch off, then press it to the "ON" Inactive position after 1 second. - Page 8 • The Recording Device is set to the USB device (in this case the device name, but Windows: often called or including the phrase "USB Audio CODEC"). 1. By the system clock, right-click over the Speaker icon select Sounds then the Recording tab, and then click on the USB device in the list and click •...
-
Page 9: Maintenance And Cleaning
5. Recording multiple layer ply board to avoid structural vibrations disturbing playback. Then, ignoring any instructions in the manufacturer's guide to select "stereo mix", Stylus Tip simply press the Record button in Transport Toolbar to start recording from the • If dirt and grime are stuck to the stylus tip, clean it turntable. -
Page 10: Replacing The Belt
Replacing the Belt 4. Turn the platter over and you will see a raised circle. Loop the new belt along the middle circle. • The belt is a consumable part. Replace the belt if the speed of playback slows down or irregular rotation occurs. -
Page 11: When The Turntable Is Moved
Technical Specifications Cartridge Replacement Turntable 1. Before replacement, put the stylus protector back on the stylus to prevent damage Model Speed Variance 1-AD07US01,H005 ±1.5% to the stylus during the replacement process. Nominal Speeds Wow and Flutter 33 1/3 & 45RPM ≤0.15%... - Page 12 Potential Incorrect Use and Fault Conditions Does the arm automatically go onto the record to play and vise versa? - The turntable is not automatic, so you should manually put the tonearm onto the This turntable is manufactured to the highest standards and undergoes strict quality record or put it back.
-
Page 13: Customer Service
Customer Service Phone: +1 909-391-3 888 (Mon-Fri 9:00am - 5:00pm PST) UNITED STATES Email: ushelp@1byonebros.com CANADA Email: cahelp@1byonebros.com UNITED KINGDOM Email: ukhelp@1byonebros.com GERMANY/FRANCE Email: euhelp@1byonebros.com ITALY/SPAIN BRAND OWNER 1byone Products Inc. 1230 E Belmont Street, Ontario, CA, USA 91761 Customer Service: +1 909-391-3888 www.1byonebros.com...
Need help?
Do you have a question about the 1-AD07US01 and is the answer not in the manual?
Questions and answers
1 BY ONE 471NA-0010 What size belt do I order?
What size belt do I order and where can I order it from? 1-AD07US01