Craftsman 315.CR2000 Operator's Manual page 5

Thefollowing signal w ordsandmeanings a reintended to explain the levels of riskassociated withthisproduct.
SYMBOL SIGNAL MEANING
,_ DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
,_ WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
,_ CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
A
0
@
&
®
n o
.../min
V
Hz
min
NAME DESIGNATION/EXPLANATION
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions Alert
Keep Bystanders
Away
Ricochet
No Blade
Recycle Symbols
Direct Current
No Load Speed
Per Minute
Volts
Hertz
Minutes
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Keep all bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or prop-
erty damage.
Do not install or use any type of blade on a product displaying this
symbol.
This product uses nickel-cadmium (Ni-Cd) and lithium-ion (Li-ion)
batteries. Local, state, or federal laws may prohibit disposal of
batteries in ordinary trash. Consult your local waste authority for
information regarding available recycling and/or disposal options.
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Voltage
Frequency (cycles per second)
Time
5 - English