Sound Feedback - Sennheiser AMBEO Max Instruction Manual

Using the AMBEO Soundbar | Max
48 | AMBEO Soundbar | Max
Using the Dolby Virtualizer
You can use the "Dolby Virtualizer" to play back Dolby audio content.
This function plays back Dolby audio content unchanged.
The "Dolby Virtualizer" can be activated/deactivated in the codec
settings of the Smart Control app.
If the "Dolby Virtualizer" is activated, you can no longer use the fol-
lowing functions/settings:
• Sound profiles
• AMBEO modes
• Equalizer
• Room calibration data (the measured room data is not used for
Dolby audio content)
Adjusting the brightness of the display
and the AMBEO display
The brightness of the
adjusted via the Smart Control app.
There are three brightness levels:
• low brightness
• high brightness
• automatic brightness (activated upon delivery)
If "automatic brightness" is selected, the
play automatically adjust to the ambient brightness.
The brightness of the
adjusted independently of each other via the app.

Sound feedback

The beep sounds of the Soundbar can be activated or deactivated via
the Smart Control app.
display and the AMBEO display
display
display and the AMBEO display
can be
and the AMBEO dis-
can also be