Auto Standby; Selecting The Input Source - Sennheiser AMBEO Max Instruction Manual

In addition to the ECO standby mode, you can switch off the
Soundbar and at the same time switch off all network connec-
tions (> 36). In this mode, power consumption is minimal, but
the Soundbar must then be switched on on the device itself.

Auto standby

If there is no playback for 20 minutes, the Soundbar automatically
switches to standby mode.
No playback:
• Bluetooth or Chromecast input is paused
• Bluetooth or Chromecast connection is disconnected
• Analog, optical or HDMI input: no playback available
Auto standby always activates the standby mode that was last used
(standby or standby without network connections).
When playback is muted ("MUTE"), auto standby is not active.
The time after which the Soundbar switches to auto standby can be
adjusted via the Smart Control app.

Selecting the input source

WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels for long periods of time can
lead to permanent hearing defects.
▷
Adjust the volume to a low level before selecting a
source.
▷
Do not continuously expose yourself to high volume
levels.
If you want to change the input source, you have the following
options:
• Press the SOURCE
• Press the SOURCE
• Use the Smart Control app.
Operating the AMBEO Soundbar | Max
button on the Soundbar.
button on the remote control.
AMBEO Soundbar | Max | 37