Fisher & Paykel CI604CTPB1 User Manual page 22

5 After a few seconds the display will
then indicate for you to set the left-
hand digit.
When the set time is up
The timer display will flash and the timer will beep
z
(note: if the surface is still hot the display will show
Touch any control to stop the beeping.
z
Notes on using the timer
Skip the last step (6) if you want to set the timer to less than 10 minutes.
z
To modify or cancel a timer setting, touch the timer display and reset the minutes as
z
desired, following the steps above.
To cancel the timer, touch the timer display. The timer will reset to
z
Note: You cannot set a timer for an individual cooking zone while the minute minder is
set. To set a timer for an individual cooking zone, cancel the minute minder, then follow
the steps in the following section 'To set the timer for a cooking zone'.
22
USING THE TIMER
6 Set the left-hand digit using the setting
selector. The timer display will flash for
a few seconds and then remain steadily
lit. The cooking zone displays will turn
off. The timer is now set and
begins counting down.
To use the cooking zone while a minute
minder is set:
7 Press
The timer display will flash with the set
timer. You can now select a cooking
zone and start cooking.
to turn the cooktop back on.
H
).
00
.