Advertisement
(55505'0№)
9
(Front Panel)
CHROMA
BRIGHT CONTRAST
(Rear Panel)
oren (CEB) sn.
0 У. HOLD control
Turn the adjust the vertical synchronization of the picture.
@ Picture controls
Use to optimize the picture. The center click position of
each control is its standard setting. This standard setting
can be varied (preset) by turning the SUB control screws at
the side of the controls. Use a screwdriver to turn the SUB
controls,
• PHASE control
Turn to adjust the picture hue, Adjust with reference to
skin color.
• CHROMA control
Turn to adjust the color density of the picture to your
preference.
* BRIGHT control
Turnto adjustthe picture brightness to your preference.
* CONTRAST control
Turn to adjust the picture contrast to your preference.
© POWER switch/indicator
Pressing this switch turns the power
on; the indicator
lights. Pressing this switch again turns the power off; the
indicator goes off.
Q Power input connector
Connect to an AC outlet with the provided power cord.
© INPUT connectors/Termination switch
Input connector
for composite video signal and output
connector for bridge-connected signal
IN
: When inputting a signal
OUT
: For bridged connection
Setting the termination switch
750
: When there is only an input signal
OPEN
: For bridged connection
Q SET UP switch
Do not reset this switch, It is for service personnel only.
* Be sure to disconnect the power plug from the AC outlet
before connecting to other equipment.
* Also refer to the instruction manual of the equipment to
be connected.
Videodisc player
Control console
* When using any of the OUT connectors (bridged output),
set its termination switch to "OPEN".
Advertisement
