Measuring
Adjustment ot
PATTERN
Adjustment
part
MAIN PCB
PATTERN
GENERATOR
and
V. LINEARITY
2. Roughly adjust the V. HEIGHT VR (R413) so that
nearly all the monoscope
pattern (cross hatch) is
displayed on the screen.
3. With the V. HEIGHT VR (R413) and V. CENTER
switch (S401), perform adjustment so that 95%
of
the monoscope pattem (cross hatch) is displayed on
the screen.
4. While turning
the V. LIN. VR
(R409),
adjust the
vertical linearity.
. Repeat the Steps 2 - 4 as required.
MAIN PCB
95%
[OVER SCAN] screen
16 (No.50353)