Advertisement
кыы, 54 |
(5)
When the four screws © are removed, the front panel
ass'y will be dismounted together with the CRT.'
e Since the CRT is heavy, remove the screws O) while
holding the front panel ass'y.
7.
Precautions
for wire
clamp
and
binding
band
(1) The wire should be clamped exactly.
(2)
Be sure not to remove
the binding band
for wire
treatment.
Should it be removed, the wire should be
treated exactly to the initial position.
10 (Мо.50353)
Chord of degauss coil
Anode cap
Pay attention to high
tensionl!
Chord of deflecting coil
Fig. 6-1
Use the long screw driver.
The screw driver is accessible from here.
Fig. 6-2
Advertisement
