3.1.2. Panel Plate Disassembly (PT-3)
Procedure
1) Turn off the air conditioner and the
power breaker.
2) Remove the screw of the big handle
and then remove the big handle
(1-3 screws) (see Fig. 1).
3) Remove the screws of the top cover
and then remove the top cover (3
screws). One of the screws is located
underneath the big handle (see Fig. 2).
Note: This section is for reference only. Actual unit appearance may vary.
Illustration
Top Cover
Outdoor Unit Disassembly
Scope of Models Covered:
YN018GMFI22RPE / YN024GMFI20RPD
Big Handle
(Some Models) 3 Screws
Figure 1
Figure 2
10