Operation - Panasonic Technics SL-1300 Operating Instructions Manual

Direct drive automatic player system
Table of Contents

Advertisement

4 PLACEMENT
@ Use the player as far away from the speakers as possible and
isolate the player from sound radiation from them.
This player is equipped with audio-insulators and designed for
the utmost absorption of vibration.
I the speakers are placed too near the player, sound vibration
may be transmitted to the tonerarm and result in "HOWLING
Place the player as far away from the speakers as possible.
© Do not place the player where it is exposed to direct sun, dust
or moisture.
Also keep away from heating equipment in order to protect the
dust cover.
5 CONNECTIONS
CONNECT TO THE AC POWER
SOCKET
Connect the AC power plug to the AC socket of 120V.
This set is designed to be used at AC 120V.
Never connect to the DC power socket or other voltage socket
I you connect the power plug to the AC outlet such as amplifiers
have, confirm the voltage and wattage of rating at the outlet
CONNECT TO THE AMPLIFIER
OUTPUT TERMINALS
AMPLIFIER
R (U-shaped)
— EMM Channel
L (White)
== —— [EEE Channel
E (U-shaped) — NT}
NOTE
Be sure to connect the ground terminal to the ampli
chassis,
Mf this connection is incomplete, a power source "HUM" will
result,
6 OPERATION
AUTOMATIC PLAYING
Release the arm clamp, so that the tonearm becomes free from
the arm rest.
Set the MEMO-REPEAT knob to the "0" position.
"R" position is continuous repeat play.
Set the record size selector to the diameter of the record you
wish to play.
Set the speed selector in the same manner as for record size
selector.
Pull the start/stop lever to the start position, then playing will
start automatically. (See Fig. 7)
When playing has finished, the tonearm will return to its rest
and the unit will shut off automatically.
jer or to the
MEMO-REPEAT knob
Fig. 7
MANUAL PLAYING
Lower the cueing lever, then the tonearm will descend to the
record surtace slowly and playing will begin.
Of course, it is possible to return the tonearm to its arm rest
'manually, then the unit will shut off automatically.
5-10 mm (3/16"-25/64")
Cueing lever
Cueing lever
(Descend)
Fig. 8

Advertisement

Table of Contents
loading

Table of Contents