Table of Contents
Advertisement
How to Use
This Manual
lntroduction-2
HP 165118
This logic analyzer combination provides 1 k of memory depth with
either 160 channels of 35 MHz state analysis, or 80 channels of
35 MHz state analysis and 80 channels of 100 MHz timing analysis.
HP 16540A,D with one HP 16541A,D Expansion Card
This logic analyzer combination provides 4 k of memory depth
(16 k with the D version) with up to 64 channels of 100 MHz state or
timing analysis.
HP 16542A (Master Card and two expansion cards)
This logic analyzer combination provides 1 M of memory depth
with 48 channels of 100 MHz state or timing analysis.
HP 16550A
This logic analyzer provides 4 k of memory depth with 102 channels
per card of 100 MHz state analysis or 250 MHz timing analysis. The
logic analyzer will also support various combinations of mixed
state/timing analysis.
This manual is organized into three chapters and one appendix:
• Chapter 1 explains how to install and configure the HP E2418A
Preprocessor Interface for state analysis with the supported logic
analyzers.
• Chapter 2 provides reference information on the format
specification and symbols configured by the HP E2418A
software. It also provides information about the inverse
assembler and status encoding.
• Chapter 3 contains additional reference information including
the characteristics and signal mapping for the HP E2418A
Preprocessor Interface. It also contains information on servicing.
• Appendix A contains information on troubleshooting problems
or difficulties which may occur with the preprocessor interface.
Advertisement
Table of Contents
