HP E2418A User Manual page 13

Connecting the
Termination
Adapter to the
Preprocessor
Interface
The 100 kOhm Termination Adapter (HP part number 01650-63203)
properly terminates the logic-analyzer probes. The following steps
explain how to connect the termination adapter to the HP E2418A
Preprocessor Interface:
1. Align the key on the small end of the termination adapter with
the slot on the appropriate connector on the preprocessor
interface.
2. Push the termination adapter into the connector.
3. Repeat steps 1and2 for each termination adapter.
Figure 1-1. Connecting Termination Adapters
Setting Up the HP E2418A
1-4
HP E2418A
TMS32020/C25 Preprocessor Interface