HP E2418A User Manual page 7

Appendix A:
Troubleshooting
Target Board Will Not Bootup ............................. A-1
"Slow or Missing Clock" ................................... A-1
Slow Clock .............................................. A-2
"No Configuration File Loaded" ............................ A-3
"Selected File is Incompatible" ............................. A-3
" ... Inverse Assembler Not Found" ......................... A-3
No Inverse Assembly ..................................... A-3
Incorrect Inverse Assembly ................................ A-3
No Activity on Activity Indicators .......................... A-3
Capacitive Loading ....................................... A-4
"State Clock Violates Overdrive Specification" ............... A-4
Unwanted Triggers ....................................... A-4
"Waiting for Trigger" ..................................... A-4
Intermittent Data Errors .................................. A-5
Bent Pins ................................................ A-5
"Time from Arm Greater Than 41.93 ms." .................... A-5
No Setup/Hold Field on Format Screen ..................... A-5
"Default Calibration Factors Loaded" (16540/41/42) ........... A-5
Contents-2