Advertisement
Fer O: Q:
Or
2
2o
ress
7.
1
8
:
o | 10
of
160
し
G
i
:
Ne
AUDIO
CHASE
o
_
he
i
(CD
CONTRCLLER
LEVEL
SPEED
|
| CHASE |
|
|
$
H
{FUNCTIONS
li
1
Front Panel Descriptions
1.
Audio Level
This controls the audio input level of the music source located at the RCA input jack.
2.
Chase Speed
This controls how fast the lights will chase or perform the automatic chase routine.
3.
Filter Button and LED
Depressing the Filter button makes the Peavey Beat-lok feature active. When this feature is active
the LED will glow red.
4.
Sound Button and LED
This button has three modes:
1) Normal, once the Chase/Pulse feature is active, by pressing the Chase button, pressing the Sound
button will place the LICON 416 into the normal mode. In this mode, indicated by the LED
glowingred, the LICON 416 willchasemusic. Pressing the Sound button again will tum offthe
music
chase, indicated by the LED tuming off, and the LICON 416 will follow
an automatic chase routine.
2) Variable Lock-Out, this mode allows the user to control the maximum chase rate. This is
accomplished by ignoring the audio inputs fora period of time after triggering. This feature provides
control of the 'lock-out time' to match the chase rate to the program material. To engage this feature
the LICON 416 must be in the Normal mode. Then, when the Chase Speed knobis moved the unit
isautomatically
placed in the Variable Lock-out mode (the LED will flash slowly). The Chase Speed
knob adjusts the 'lock-out time' from less than 100 milliseconds (10 on the Chase Speed), to
approximately 1.5 seconds (0 on the Chase Speed).
3) Skip Beat, engage this mode by depressing and holding the Sound button for at least two
seconds. This mode allows the user to skip beats by using the Chase Speed knob. Setting the
Chase Speed to 0 will not skip any beats, while a setting of 1 will skip 1 beat and so on, up to 10
beats.
5.
Chase Button and LED
This button makes the Chase/Pulse feature of the LICON 416 active. Pressing and releasing the
button will put the LICON 416 into Chase mode. The LED will glow red in this mode.
Pressing and holding the button for at least two seconds will put the LICON 416 into Pulse mode.
The LED will flash in this mode.
6.
Pattern Select Button and LEDs
This button advances the LICON 416 through the sixteen different chase pattems. The four LEDs
Advertisement
