Table of Contents
Advertisement
SURROUND
EFFECT
lExampie Ad
Not recommended for DOLBY SURROUND
application.
jExample 8:1
Offers most
varied effects; good for watching sports programs or listen-
ing to live recordings
{Example C:}
Good sound dispersion; recommended for movies, etc.
Example A:
Example B:
H he
OME
ZB
Yl
EFFECT CHART
!
Example
2
P
|
2
|
SURROUND
'
SIMULATED
°
°
i
3
STADIUM
x
°
i
2D
DOLBY SURROUND
x
°
5
|
Example C:
Listening ates
SURROUND:
CEFT |
RIGHT}
Dolby Surround level adjustment procedure
Use SURROUND MODE switch to select DOLBY SURROUND.
. Turn on front speakers and rear speakers.
. Select a monaural source (such as AM radio).
. Set balance and rear level to preset positions.
* Press BALANCE L and R switches together.
» Press REAR LEVEL
+ and — switches together.
. Adjust MASTER VOLUME to.a suitable listening level.
§. Turn off front speakers. (Leave rear speakers on.)
7. Adjust rear panel SURROUND BALANCE (INPUT BALANCE)
knob to the position that gives minimum volume from the rear
speakers.
bwn
wn
TWO WAY SOUND EFFECTS
8. Turn on front speakers. (Leave rear speakers on.)
9. Use INPUT SELECTOR to select desired source.
10. Use BALANCE L and R switches to adjust left-to-right balance.
11. Use REAR LEVEL + and - switches to adjust front-to-rear
volume baiance.
ff using the center channel, adjust the amplifier connected to the
CENTER OUT jack so that the center speaker volume is nearly the
same as the left-right speaker volume.
VCR NOISE FILTER
SIMULATED STEREO
This function transforms monaural signals into simulated stereo sound.
Use it when you wish to experience a sense of stereo presence when
listening to AM broadcasts, or VCR and other monaural signal sources.
NOTE:
The simulated stereo function can also be used with stereo sound
sources, but it will result in an effect somewhat different trom the normal
Stereo sound.
5
<ARBIN74>
Advertisement
Table of Contents
