Advertisement
3. CONNECTING THE POWER CORD
• Always handle the power cord with care and never pull the plug out of the wall socket by tugging the cord.
Hold the plug to remove it from the wall.
• Ensure the VOLUME control is set to the minimum position before plugging in the power cord.
• Connect the power cord to the AC (mains) outlet.
• When plugging and unplugging make sure the power switch on the unit is turned off.
NOTES:
• Verify that all connections are properly and securely made and that the amplifier and components have been
plugged in. Using higher quality interconnect cables will improve sound quality.
LOCATION AND OPERATION OF CONTROLS AND INDICATORS_
See Illustrations 1 and
5 -
Rear and Front Panels, to visualize the location of the switches and controls.
NOTE:
Ensure the volume control is set to the minimum position before turning the power on.
1. POWER BUTTON/INDICATOR
Switches the power on and off once power is supplied to the unit.
2. CHANNEL INDICATORS
The CHANNEL indicators light up red to show which channels are in use.
3. BRIDGED MODE INDICATOR
The BRIDGED mode indicators light up amber to show that the BRIDGED switch on the rear panel is set to the
BRIDGED position.
4 LEVEL CONTROLS
There is a LEVEL control for each amplifier set, which are useful for custom installations or for setting the
sensitivity to match other amplifiers or speakers in a surround sound system. Turn the LEVEL controls clockwise
for greater sensitivity, and counterclockwise for less sensitivity.
5. BRIDGED SWITCHES
(ON REAR PANEL)
When the BRIDGED switch is in the STEREO position, this (A, B or C) is a 2-channel power amplifier. When the
BRIDGED switch is in the BRIDGED position, this (A, B or C) is a single channel power amplifier.
ILLUSTRATION 5 - FRONT PANEL
©
©
®
©
4
Advertisement
