Table of Contents
Advertisement
Step 6: Press
key, LED displays "S-2".
Step 7: Press Number Keys "5", "4","0" button, LED
displays "5:40" .
Step 8: Press "
"keyto input 50% power, LED displays
"PL5". The second stage is finished.
Step 9: Press
key to save. To use this program press
"3". The oven will start operating for 7:05 (1:25 @ 70%
power + 5:40 @50% power).
14. Use Option Mode
1) This allows the user to choose various oven operations.
2) Open the oven door and press Number Key "2" for 5
seconds. The buzzer sounds once to indicate User Option
Mode is activated.
3) LED displays "OP: - -".
4) Press any Number Key to enter related options as noted
in chart below.
Numbered Pads
1
End of Cycle Beep
2
Key Beep Volume
3
Key Beep
4
Active Display
5
On-the Fly Cooking
6
Reset to Ready Mode
7
(some models)
Maximum Heating Time
8
Manual Operation
9
(some models)
Double Digit Operation
0
Clean Filter Message
©2017 ACP, Inc.
Cedar Rapids, IA 52404
Electronic Control Operation
Display
Options (Factory Settings in Bold)
OP:10
3 second beep.
OP:11
Continuous beep until door is opened.
OP:12
5 beep bursts until door is opened.
OP:20
Eliminates beep.
OP:21
Sets volume to low.
OP:22
Sets volume to medium.
OP:23
Sets volume to high.
OP:30
Prevents beep when pad is pressed.
OP:31
Allows beep when pad is pressed.
OP:40
15 seconds after oven door is opened, keyboard disabled.
OP:41
30 seconds after oven door is opened, keyboard disabled.
OP:42
1 minute after oven door is opened, keyboard disabled.
OP:43
2 minutes after oven door is opened, keyboard disabled.
OP:50
Prevents di erent pre-programmed pads to be activated during cooking.
Allows different pre-programmed pads to be activated during cooking.
OP:51
OP:60
Opening oven door does not reset oven back to ready mode.
OP:61
Opening oven door resets oven back to ready mode.
OP:70
Allows 60 minutes of heating time (some models).
OP:71
Allows 10 minutes of heating time.
OP:80
Allows use of preprogrammed pads only.
OP:81
Allows use of manual time entry and preprogrammed pads.
OP:90
Allows 10 (0-9) preprogrammed pads.
OP:91
Allows 100 (00-99) preprogrammed pads.
OP:00
Do not display message.
OP:01
Display message for 24 hours every 7 days.
OP:02
Display message for 24 hours every 30 days.
OP:03
Display message for 24 hours every 90 days.
Page 9 of 12
Example: To set the buzzer or key beep volume to
medium, Press Number Key "2" "OP:22" displays.
To change, repeat pressing "2" LED displays "OP:20",
"OP:21" "OP:22" "OP:23" etc.
5) Press
key to save the selected setting. LED
displays "OP: - -" to indicate selection was saved and
another option change can be made.
6) During programming process, press
Door Open Mode. Close the door will enter Ready Mode.
7) If
key is not pressed as the last step, the selected
option will not be saved.
15. Inqury Function
During the cooking process, press
power level.
LED will display the power level for 3 seconds and then
return to remaining cook time display.
key to enter
key to check the
Part No. 20042803
Revised 03/31/2017
Advertisement
Table of Contents
