Table of Contents
Advertisement
11. Programming Mode
1) This mode allows the user to assign cook times and
power levels to the keypad number keys.
2) Open the door and press Number Key 1 for 5 seconds.
The buzzer sounds once to indicate Programming Mode is
activiated.
3) LED displays "ProG".
4) Press a number key to change or review setting.
5) Press
key, LED will display the saved time. Input
the desired new time.
6) Press
,
,
, or
LED will display the related power. If the same key is
pressed twice, the power will change to PL10 ( Power Level
10 or full power). If no power chosen, PL10 is the default.
7) If X2 is pressed, LED displays "CF:80". The default
factor of 80%. To change the cooking factor, press desired
Number Key for new factor.
8) After setting the time and power, press
the cooking program. LED displays "ProG".
9) If total cooking time entered exceeds the maximum time
allowed User Option 7, when
the program. If the program chosen exceeds the maximum
time allowed by User Option 7, then the oven will beep
three times and display 00:00 to indicate the program is
unacceptable.
10) Close the door and the oven will return to Ready Mode.
Press
key and the oven will return to Door Open
Mode.
11) Program example for a cook setting of 1 minute and 25
seconds at 70% power.
Step1: Open oven door and press Number Key "1" for 5
seconds, LED displays"ProG".
Step 2: Press Number Key "3". The program will be saved
in "3".
Step 3: Press
key, LED displays "0:00".
Step 4: Press Number Keys "1", "2" and "5" to input the
cooking time, LED displays 1:25.
Step 5: Press
key to input 70% power level. LED
displays "PL7".
Step 6: Press
key to save. To use this program press
"3". The oven will start operating for 1:25 @70% power.
Note:
1. If the electric supply is interrupted, the saved program
©2017 ACP, Inc.
Cedar Rapids, IA 52404
Electronic Control Operation
to input the power level.
key to save
key is pressed to save
will not be lost.
2. Pressing
key returns the oven to Ready Mode and
cancels entered settings
12. Double Quantity Cooking
1)The X2 pad allows two quanities of the same food item to
be cooked at once
2) Press X2 key and then Preset Program Number(s)
0-9 with in 5 seconds. The oven will start cooking per the
quantity preset cooking time.
3) Press X2, LED displays "doub". Press preprogrammed
number key, LED displays the cooking time for two
quanities.
Example: If number "5" key is programmed to cook for 1:00,
when first pressing X2 key and then pressing number "5"
key, the oven will automatically set the cook time to 1:48.
(1:00 cook cycle x 80% "X2" cook factor = 1:48)
4) When the cooking program finishes, the oven will enter
End of Cook Cycle Mode.
Note: X2 function may be used only with Programming
Mode cooking.
13. Stage Cooking Programming
1) This allows food items to be cooked using a combination
of various Power Levels and times.
2) A maximum of three stages can be set.
After setting the power and time for the first stage, press
key to set the second stage.
Repeat to set the third stage.
3) When setting the second and the third stage, press
key LED displays "S-2" or "S-3".
4) Press
key to start cooking.
Program example for two stages. Stage 1: 1 minute 25
seconds @ 70% power; Stage 2: 5 minutes 40 seconds
@50% power.
Step 1: Open oven door and press Number Key "1" for 5
seconds LED displays "ProG".
Step 2: Press Number Key "3". The program will be saved
in "3".
Step 3: Press
Step 4: Press Number Keys "1","2","5" to input the cooking
time. LED displays "1:25".
Step 5:. Press
key to input 70% power, LED displays
"PL7".
The first stage is finished.
Page 8 of 12
key, LED displays "00:00".
Part No. 20042803
Revised 03/31/2017
Advertisement
Table of Contents
