Owner's Manual Contents Model Identification ......2 Model Specifications ......2 RECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE ....MICROWAVE ENERGY MPORTANT SAFETY INSTRUCTIONS Earthing Instructions ......5 Installation ........5 ommercial icrowave Display and Features......6 Using the Oven Control ....8 Keep these instructions for future reference.
Commercial Date of purchase: __________________________ Microwave Ovens category. Warranty service must be Dealer’s name and address: __________________ performed by an authorized servicer. Amana also ________________________________________ recommends contacting an authorized servicer if service is required after warranty expires.
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message WARNING When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons. 1. READ all instructions before using equipment. 9.
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING Liquids such as water, coffee, or tea are able to be To avoid risk of fire in the oven cavity: overheated beyond the boiling point without appearing a. DO NOT overcook food. Carefully attend oven to be boiling due to surface tension of the liquid.
This oven should be plugged into a separate circuit with the electrical rating as provided in product specifications (available on Amana’s wavelink website). When a microwave oven is on a circuit with other equipment, an increase in cooking times may be required and fuses can be blown.
Display and Features POWER ITEM 2000 COOK LEVEL PREHEAT NOT READY STANDBY Cooking Display There are words in the DISPLAYS DESCRIPTION display that never Displays cooking time. If stage cooking is actually display. 00:00 programmed, total cooking time is displayed. The display is used for many COOK LEVEL displays the current microwave different models of microwaves.
Display and Features Single Pad Programming Start Pad The start pad is This feature enables each numbered pad to be used to begin a programmed for a specific use, such as cooking a manual time entry certain number of potatoes or defrosting and then cooking vegetables or cooking cycle.
Using the Oven Control Manual Time Entry Microwave Cooking To cook food using a specific entered time and power level. Microwave cooking uses high frequency energy waves to heat the 1. Open oven door and place food in oven. Close door. food.
7. Press PROGRAM SAVE to save the program changes. time the quantity pad is pressed, the 8. To discard changes, press STOP/RESET. cooking time will be increased by the user-specified percentage. Amana’s Programming Multiple Stages default cooking factor is 80%. Stage cooking allows consecutive cooking cycles without interruption.
User Options HIDDEN Changing user options Didn’t like an option? Options such as single or double pad programming and beep volume can be changed to suit individual preferences. Factory settings are marked in bold. To change the oven back to the factory To change options READY must display without ITEM: setting, simply select the option that is 1.
Care and Cleaning Cleaning Interior, Exterior, and Door CAUTION Clean microwave oven with mild detergent in warm water using soft sponge or cloth. Wring sponge or cloth to remove excess water before wiping To avoid risk of product damage, equipment. If desired, boil a cup of water in microwave oven to loosen soil clean air filter regularly.
Care and Cleaning Replacing Oven Light WARNING 1. Disconnect electrical supply. To avoid risk of burns or 2. Remove screw from access cover electrical shock: on top left wall of oven exterior. • disconnect electrical supply to 3. While wearing protective gloves, oven before changing light bulb.
2. Unplug oven, wait for 1 minute, and plug in oven. • Disconnecting electrical supply may eliminate service code. If failure continues, contact an authorized Amana servicer. Place one cup of water in oven. Oven operates but does not heat Run for one minute at full power (100%).
Need help?
Do you have a question about the RC5KFT2 and is the answer not in the manual?
Questions and answers