Craftsman 917.2933 Owner's Manual page 7

INSERT
CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column, Push cables
into clipo
Handle Column
Cables
Cable Clip
CONNECT SHIFT ROD
= Insert end of shift rod farthest from bend
into hole of shift lever indicator°
o Insert hairpin clip through hole of shift
rod to secure.
° Insert other end of shift rod into hole in
shift lever,
° Insert second hairpin clip through hole of
shift rod.
REMOVE TILLER FROM CRATE
- Adjust handle assemby to lowest posi-
tion_Be sure lock lever is tightened
securely.
,, Make sure shift lever indicator is in "N"
(neutral) position,
° Tilt tiller forward by lifting handle.
Separate cardboard cover from leveling
shield°
o Rotate tiller handle to the right and pull
tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at
the factory for shipping purposes, Correct
and equal tire pressure is important for
best tilling performance.
o Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
o Handle height may be adjusted to better
suit operator, (See 'q'O ADJUST HAN-
DLE HEIGHT" in the Service and
Adjustments section of this manual),
Attach this end to shift lever
0_-_...Attach this End To shift k
Lever Indicator Shift Rod
Shift Rod Hairpin Clip Shift Lever
Indicator
Shift Lever
,, i "_ '
Ha_rpLn Clip
Shift
_, _