Using The Radio - Pioneer KEH-P5000 Owner's Manual

Using the Radio
Parts Identification
Fig. 1
[1] Tuning/Local seek sensitivity/Seek,
Manual
[2] Source selector
[6] Band
{8] Best Stations Memory (BSM)
{9] Function changeover button
[10] Preset
[11] Preset (FM1)/Function button
Function:
Local station
@ FM stereo/mono
@ Present scan
{12} Display
Fig. 2
[14] Band
[15] FM stereo
[16] FM mono
[17] Local station
[18] Manual
[20] Function indicator
[21] Frequency
[22] Preset number
12
Note:
* 12 stations can be preset with @ to ® of
button [11] for FM1 only. Press button [9]
to switch between the function button
and the preset button. (See page 9.)
Listening to the Radio
¢ Electronic Tuner
Frequency allocation differs depending
upon the area. This unit has been designed
> ci /t
r H SCO AS
(FM1) (FM2) (MW/LW)
5.Assign the tuned frequency to one of the
buttons in Bank [10] (preset memory).
Press and hold down one of the button in
Bank [10] for at least 2 seconds. The fre-
quency is assigned to the selected button
when the preset number [22] stops flashing
on the display. Up to 18 FM stations (12
FM1 stations and 6 FM2 stations), and 6
MW/LW stations can be assigned to the
preset memory.
6.Once a frequency is assigned to a button
in Bank [10], you just need to press that
button to tune it in.
This also causes the number of the button
pressed to appear at position [22] on the
display.
* You can preset 12 FM1 stations. Preset
them with button [11] as described above.
Adjusting Seek Sensitivity
The seek tuning function of this tuner lets
you select between a local setting for recep-
tion of strong stations only, and a DX (dis-
tant) setting for reception of weaker sta-
tions. The local setting also has 4 seek tun-
ing sensitivity levels for FM and 2 levels for
MW/LW to match local conditions.