Table of Contents
Advertisement
No.
Connector/feature
13
Memory module slots (internal)
14
Coin-cell battery connector
(internal)
15
Smart card reader connector
17
Fingerprint connector
18
Wireless-LAN card slot (internal)
19
LED cable connector (internal)
20
Media-card slot (external)
21
USB 3.1 connector Gen 1
(external)
22
Keyboard subcard cable
connector
23
Keyboard cable connector
24
TrackPoint pointing cap cable
connector
Looking up FRU information
For detailed FRU information, including part numbers, descriptions, and substitution part numbers, go to
https://support.lenovo.com/partslookup
56
P1/X1 ExtremeHardware Maintenance Manual
Internal cable required
No
Coin-cell battery cable
Smart card reader cable
Fingerprint cable
No
LED cable
No
No
Keyboard subcard cable
Keyboard assembly cable
TrackPoint pointing cap cable
.
Cable connection
Insert the memory modules into
these slots.
The coin-cell battery comes with a
cable. Connect the cable to this
connector.
Connect one end of the smart card
reader cable to the smart card
reader and the other end to this
connector.
Connect one end of the fingerprint
cable to the fingerprint reader and
the other end to this connector.
Insert the wireless-LAN card into
this slot.
Connect one end to the camera
connector and the other end to
this connector.
Insert a supported media card into
this slot.
Connect USB-compatible devices
to this connector.
Connect one end of the keyboard
subcard cable to the connector on
9
the system board
and the other
end to this connector.
Connect the keyboard cable to
this connector.
Connect the TrackPoint pointing
cap cable to this connector.
Advertisement
Table of Contents
