Advertisement
Quick Links
June 2021© Toro GM328 ROPS Operation Manual
Toro GM3280 4-post ROPS
Toro GM3280 4-post ROPS Cab
This ROPS is designed and built to fit the Toro GM3280 and 3320.
Designed and Built by:
Tektite Manufacturing Inc:
427 Buffalo Street
P.O. Box 639
Winkler, MB
R6W 4A8
Canada
PH: 204-331-3463
Fax: 204-331-4159
sales@tektite.ca
www.tektite.ca
One year standard product warranty provided by Tektite.
Advertisement
Related Manuals for Tektite Toro GM328
Summary of Contents for Tektite Toro GM328
- Page 1 June 2021© Toro GM328 ROPS Operation Manual Toro GM3280 4-post ROPS Toro GM3280 4-post ROPS Cab This ROPS is designed and built to fit the Toro GM3280 and 3320. Designed and Built by: Tektite Manufacturing Inc: 427 Buffalo Street P.O. Box 639...
- Page 2 June 2021© Toro GM328 ROPS Operation Manual Tektite Manufacturing Incorporated thanks you for purchasing a Toro GM3280 Series ROPS! Tektite has worked very hard to design and build this ROPS product and we hope that it provides you with many years of ROPS protection.
- Page 3 “as is” basis; c) wiper blades, light bulbs, fuses, clear vinyl or other consumables; d) glass where the point of failure has not been preserved intact and delivered to Tektite for analysis of the cause of the failure;...
-
Page 4: Safety Precautions
June 2021© Toro GM328 ROPS Operation Manual Safety Precautions Safety First Read these instructions carefully. It is essential that you read the instructions and safety regulations before you attempt to assemble or use the features that are on this cab/ROPS. - Page 5 June 2021© Toro GM328 ROPS Operation Manual General Safety 1. Never let an unqualified or untrained driver operate the tractor. 2. Keep a fire extinguisher, with ABC rating securely fastened in the ROPS. Maintain it and be familiar with its use.
- Page 6 June 2021© Toro GM328 ROPS Operation Manual Safe Operation on Rough Terrain 1. Drive the tractor slowly on hillsides and curves to eliminate the danger of tipping. Avoid slopes which are too steep for safe operation. Avoid sharp uphill turns.
- Page 7 3. New ROPS decals and tractor decals are available from your tractor dealer. ROPS Safety 1. Install the ROPS in accordance with Tektite mounting instructions. Failure to do so may affect the ROPS ability to withstand a roll over. 2. If the ROPS is subjected to alteration, structural damage or involved in an over turn accident, the entire structure must be replaced.
- Page 8 June 2021© Toro GM328 ROPS Operation Manual Operating Instructions Important The following section locates, identifies and briefly describes the functions of all cab controls. All operators should familiarize themselves with control location and function prior to operating the tractor. Failure to do so may result in unsafe operation of the tractor and possible injury or death to operators and bystanders.
- Page 9 Cab Circuit Protection The Tektite ROPS is wired to provide maximum protection against individual circuit overload. All optional components are fused internally behind the cab switch plate. Cab wiring is direct to the tractor battery. DO NOT leave electrical options activated when tractor is not running as...
- Page 10 June 2021© Toro GM328 ROPS Operation Manual After your ROPS Cab has been installed: Before starting a tractor equipped with a Tektite ROPS: 1. Clear the operator platform of all tools. Tools left in or around the ROPS and tractor can cause operator interference which could lead to bodily injury and/or damage the machine.
Need help?
Do you have a question about the Toro GM328 and is the answer not in the manual?
Questions and answers