Advertisement
CLIMBING INSTRUCTIONS
-Check that your harness is secure, check that cables are properly quick clipped, and make sure that the seat straps on
your seat section are off to the side, they should not obstruct the cable connecting to the tree in anyway while climbing.
-Familiarize yourself with this product's function so you feel comfortable with the climbing procedure.
FIG.1
Lean against shooting rest
1
and lift your feet to raise
foot platform. Push down
to set foot platform in
raised position. FIG.1
FIG.4
FIG.5
Distributed by Primal Vantage Company Inc., 2407 W. Euclid Ave., Littleton, CO 80120
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
Before beginning to climb
-Practice at ground level with your Full Body Harness.
FIG.2
Stand and lift up on seat platform
to adjust it to a comfortable level.
2
Push down to set seat platform in
raised position. Raise your
harness tether to take up the
slack. FIG. 2
When you have reached the desired height to hunt from, secure Buckle Straps
4
they are tight in a sitting position. The pressure created on Seat Platform from securing
Buckle Straps
will prevent Foot Platform and Seat Platform from slipping down
should you decide to stand and take pressure off Seat Platform. FIG. 4
Before turning around, attach the top back of Seat Pad
5
webbing straps and speed buckle. First completely loosen the webbing straps, wrap
both ends around tree trunk, fasten speed buckle and tighten. FIG. 5
Carefully remove one foot at a time from the foot straps. Slowly turn around never
6
taking both feet off of the foot platform, you MUST always have weight pressed on the
foot platform
B
.
Sit on the seat Pad, if any adjustment needs to be made to the seat placement, you
7
MUST climb back to the ground and adjust on the ground. Using a safe hoist/lift
system, raise your unloaded weapon.
8
To climb back down the tree, reverse the process, always ensuring you are constantly
adjusting your harness tether as you move.
BULLET DRIVE ALUMINUM CLIMBER
FIG.3
Again, lean against shooting rest and lift
you feet to raise foot platform. Push down to
set foot platform in raised position. FIG.1
3
To continue climbing up tree, repeat steps 1
through 3, while continuously adjusting your
harness to keep strap above your head with
minimum slack.
C
around tree trunk using
WWW.PRIMALTREESTANDS.COM
MODEL: PVCS-420
so
©2018 (rev. 3/18)
Advertisement
