Siemens SINUMERIK ONE MCP 1900.2 Equipment Manual page 8

Fundamental safety instructions
1.1 General safety instructions
NOTICE
Overheating due to inadmissible mounting position
The device may overheat and therefore be damaged if mounted in an inadmissible position.
• Only operate the device in admissible mounting positions.
Unexpected movement of machines caused by inactive safety functions
Inactive or non-adapted safety functions can trigger unexpected machine movements that
may result in serious injury or death.
• Observe the information in the appropriate product documentation before commissioning.
• Carry out a safety inspection for functions relevant to safety on the entire system, including
• Ensure that the safety functions used in your drives and automation tasks are adjusted and
• Perform a function test.
• Only put your plant into live operation once you have guaranteed that the functions
Note
Important Safety instructions for Safety Integrated
If you want to use Safety Integrated functions, you must observe the Safety instructions in the
Safety Integrated documentation.
8
WARNING
all safety-related components.
activated through appropriate parameterizing.
relevant to safety are running correctly.
ONE MCP Part 2: MCP 1900.2
Equipment Manual, 01/2023, A5E52559449B AA