Related Manuals for Daktronics P1753
Summary of Contents for Daktronics P1753
- Page 1 LED TIMER W/ BATTERIES DISPLAY MANUAL P1192, P1753 DD2959933 Rev 10 03 August 2021 201 Daktronics Drive Brookings, SD 57006-5128 www.daktronics.com/support 800.325.8766...
- Page 2 Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
-
Page 3: Table Of Contents
Replacing a Driver ��������������������������������������������������������������������������������������������������������������������������16 Setting the Driver Address �������������������������������������������������������������������������������������������������������������16 Replacing Batteries ..........................16 Horn (TI-2015/TI-2215) ..........................17 Replacement Parts ..........................17 7 Daktronics Exchange and Repair & Return Programs ����������������������������������������������������19 Exchange Program ..........................19 Repair & Return Program ........................20 Daktronics Warranty & Limitation of Liability ...................20 A Reference Drawings �����������������������������������������������������������������������������������������������������������21 B Daktronics Warranty & Limitation of Liability ��������������������������������������������������������������������35 – i –... - Page 4 This page intentionally left blank.
-
Page 5: Introduction
Figure 1: Specifications Label Please have the assembly number, model number, and the date manufactured on hand when calling Daktronics customer service to ensure the request is serviced as quickly as possible. Knowing the facility name and/or job number will also be helpful. -
Page 6: Daktronics Nomenclature
(sport inserts) to control multiple sports. Refer to the following manuals for operating instructions: All Sport 1600 Series Control Console Operation Manual (ED-12462) • All Sport 5000 Series Control Console Operation Manual (ED-11976) • These control console manuals are available online at www.daktronics.com/manuals. Product Safety Approval Daktronics outdoor scoreboards are ETL-listed, tested to CSA standards, and CE-labeled. Contact Daktronics with any questions regarding testing procedures. Introduction... -
Page 7: Specifications
Specifications The table below lists all of the mechanical specifications, circuit specifications, and power requirements for the displays in this manual. TI-2203 (TI-2003 w/ Batteries) TI-2215 (TI-2015 w/ Batteries) Display Only: Display Only: 3'-0" H x 4'-0" W x 8" D 2'-4" H x 3'-4" W x 8" D (914 mm, 1.22 m, 203 mm) (711 mm, 1.02 m, 203 mm) With Side Stands:... -
Page 8: Mechanical Installation
Mechanical Installation The display itself may feature a carrying handle and may not require assembly or permanent installation. Some assembly may be required, however, for attachment of a wheeled cart. Cart Assembly The display cart (Figure 4) comes standard with four wheels. Included in the cart kit is an installation quick guide (DD3695776). -
Page 9: Electrical Installation
Power for the display is provided in two ways: via standard 120 VAC line, or by means of two sealed lead-acid DC batteries. Daktronics supplies two 12 V batteries, rated at 28 ampere hours (A/H), as original equipment. Refer to Section 5: Battery Care and Charging (p.7) for information on battery care and use of the on-board battery... -
Page 10: Radio Settings
For more information, refer to the Gen VI Radio Installation Manual (DD2362277), provided with the receiver unit and available online at www.daktronics.com/manuals. Electrical Installation... -
Page 11: Battery Care And Charging
Battery Care and Charging This section describes care and operation of the on-board battery charging system. On-Board Charger On a full charge, the two internal batteries provide enough power for approximately 14 hours of normal operation. Keeping the batteries charged will help extend their life. Be sure that the batteries are fully charged before storing the display during the off-season;... - Page 12 The charge cycle is as follows: 1� Soft Start – Charger verifies connections are good and the battery is capable of accepting a charge. Batteries with very low voltage (near dead) will be slowly charged to not harm the battery. When the battery voltage reaches 10 V for 30 seconds, the charger switches to the next stage.
-
Page 13: Operation
If the in-line 10 A, 32 VDC fuse in either cable blows due to improper connection to a battery, replace the fuse with an identical 10 A fuse only (Daktronics part # F-1006). Never replace a blown fuse with a higher-value fuse. -
Page 14: Radio Interference
Problem Cause Solution Replace DC output fuse with a Open DC output fuse. 10 amp fuse. Green LED stays on when Faulty or contaminated terminal Clean and tighten or repair all the battery is known to be connections. terminal connections. low. -
Page 15: Dc Connection Precautions
• Be extra cautious while servicing the display to reduce the risk of dropping a tool onto the battery. It might spark or short-circuit the battery or another electrical part, which could cause an explosion. • Remove all personal metal items such as rings, watches, and other jewelry when working with a lead-acid battery. -
Page 16: Troubleshooting
Troubleshooting Disconnect power before doing any repair or maintenance work on the display. Permit only qualified service personnel to access internal display electronics. Disconnect power when not using the display. Troubleshooting Table The table below lists potential problems with the display and indicates possible causes and corrective actions. This list does not include every symptom that may be encountered, but it does present several of the most common situations that may occur. Problem Possible Cause Solution/Items to Check... - Page 17 Possible Cause Solution/Items to Check Check fuse in fuse holder labeled F5. If Display does not run on Blown fuse blown, replace with Daktronics part # 120 VAC power F-1077. Ensure the correct sport code is being Incorrect sport code used for the display model. Refer to the appropriate console operation manual.
-
Page 18: Component Locations And Access
Component Locations and Access Reference Drawing: Component Location; TI-2203 ................. DWG-3438261 Component Location; TI-2215 ................. DWG-3438262 To gain access to the internal components of the TI-2003/TI-2203, remove the screws securing a digit panel to the display face, and then carefully lift the panel away from the scoreboard, sliding it out and down. -
Page 19: Led Driver
DWG-3438261 and DWG-3438262 in Appendix A indicate the driver connectors controlling the digits. The numbers shown in the upper half of a digit indicate which driver connector is wired to it. LED Driver Reference Drawings: Specifications; LED Driver IV, 16 Col ..............DWG-288137 Specifications;... -
Page 20: Replacing A Driver
Replacing a Driver If the driver status indicators are not working correctly, the driver may need replacement. 1� Open the front panel as described in Component Locations and Access (p.14). 2� Remove the metal cover of the driver enclosure by lifting it up, then back and down to expose the driver components. -
Page 21: Horn (Ti-2015/Ti-2215)
Replacement Parts The following table contains display components that may require replacement. Many of the other components will have attached part number labels. Description Daktronics Part # Digit segment, 24" outdoor LED, red (vertical) 0A-1192-6150 Digit segment, 24" outdoor LED, red (horizontal) 0A-1192-6151 Digit segment, 24"... - Page 22 Power cord, 360º rotating, 8' W-1181 Cable, 20' phone plug W-1236 Cable, 50' phone plug W-1237 Cable, 30' phone plug W-1238 Cable, 10' phone plug W-1340 Fuse holder X-1287 Refer to Section 7: Daktronics Exchange and Repair & Return Programs (p.19) for information on exchanging or returning parts. Troubleshooting...
-
Page 23: Daktronics Exchange And Repair & Return Programs
Exchange Program The Daktronics Exchange Program is a service for quickly replacing key components in need of repair. If a component fails, Daktronics sends a replacement part to the customer who, in turn, returns the failed component to Daktronics. This decreases equipment downtime. -
Page 24: Repair & Return Program
Repair & Return Program For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps: 1� Call Daktronics Customer Service. United States & Canada: 1-800-DAK-TRON (325-8766) Outside the U.S. & Canada: +1-605-275-1040 2�... -
Page 25: A Reference Drawings
Reference Drawings Refer to Resources (p.1) for information regarding how to read the drawing number. Any contract-specific drawings take precedence over the general drawings. Reference Drawings: Segmentation, 7 Segment Bar Digit ..............DWG-38532 Specifications; LED Driver IV, 16 Col ..............DWG-288137 Installation Drawing; Outdoor Scbd Gen VI Radio Receiver ...... DWG-1109181 Assy;... - Page 26 This page intentionally left blank.
- Page 27 THIRD ANGLE PROJECTION THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2021 DAKTRONICS, INC. (USA) BASKETBALL PROJECT:...
- Page 29 DAKTRONICS, INC. THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC. COPYRIGHT 2012 DAKTRONICS, INC. ALL SPORT RADIO ADDED GYRUS VIEW DATE: INSTALLATION DRAWING;...
- Page 30 OUTDOOR SHEETMETAL SCOREBOARDS PROJ: ASSY; TI-2015 W/STANDS TITLE: KDRAGT KDRAGT 08-JUN-15 DESIGN: DRAWN: DATE: 8 JUN 15 CHANGED SO NUMBER TO P1753, CHANGED PR NUMBER TO DEFINED BY BOM 18100 1/12 BOTTOM VIEW SCALE: 1200521 SHEET: JOB NO: FUNC-TYPE-SIZE DATE:...
- Page 31 DAKTRONICS, INC. DRAWING ARE CONFIDENTIAL AND PROPIETARY. DO NOT BROOKINGS, SD 57006 REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED OFF = Disconnected WRITTEN CONSENT OF DAKTRONICS INC. Copyright © 2015 Daktronics Inc. DO NOT SCALE DRAWING PROJECT Reference Drawings TITLE SPECIFICATIONS;...
- Page 32 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. COPYRIGHT 2015 DAKTRONICS, INC. OUTDOOR SHEETMETAL SCOREBOARDS SCHEMATIC; BATTERY OPERATED TI-XXXX W/HORN DOPPELT...
- Page 33 THIRD ANGLE PROJECTION ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY NOTES: ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) REFERENCE ED-3695776 FOR MORE ASSEMBLY DETAILS OUTDOOR SCOREBOARDS PROJECT: DRILL OUT 7/16"...
- Page 34 DATE: ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY 10 NOV 20 ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) PER EC-42166: REPLACED POWER JACK WITH J-1458 DATE:...
- Page 35 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) OUTDOOR SHEETMETAL SCOREBOARDS...
- Page 36 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. COPYRIGHT 2016 DAKTRONICS, INC. (USA) OUTDOOR SHEETMETAL SCOREBOARDS PROJECT: COMPONENT LOCATION;...
- Page 37 ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY - SEE DWG-1198707 FOR COVER LABELING ANY MEANS WITHOUT THE EXPRESS WRITTEN CONSENT OF DAKTRONICS, INC. OR ITS WHOLLY OWNED SUBSIDIARIES. LABELS ARE PUT ON IN FINAL ASSEMBLY COPYRIGHT 2020 DAKTRONICS, INC. (USA)
- Page 38 This page intentionally left blank.
-
Page 39: B Daktronics Warranty & Limitation Of Liability
Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement (SL-02374). Daktronics Warranty & Limitation of Liability... - Page 40 This page intentionally left blank.
- Page 41 Warranty Coverage. Daktronics warrants to the original end user (the “End User”, which may also be the Purchaser) that the Equipment will be free from Defects (as defined below) in materials and workmanship for a period of one (1) year (the “Warranty Period”). The Warranty Period shall commence on the earlier of: (i) four weeks from the date that the Equipment leaves Daktronics’...
- Page 42 In no event shall Daktronics be liable for loss, damage, or injury of any kind or nature arising out of or in connection with this Warranty in excess of the Purchase Price of the Equipment. The End User’s remedy in any dispute under this Warranty shall be ultimately limited to the Purchase Price of the Equipment to the extent the Purchase Price has been paid.
- Page 43 For End User’s protection, in addition to that afforded by the warranties set forth herein, End User may purchase extended warranty services to cover the Equipment. The Extended Service Agreement, available from Daktronics, provides for electronic parts repair and/or on-site labor for an extended period from the date of expiration of this warranty. Alternatively, an Extended Service Agreement may be purchased in conjunction with this Warranty for extended additional services.
- Page 44 This page intentionally left blank.
Need help?
Do you have a question about the P1753 and is the answer not in the manual?
Questions and answers