Subscribe to Our Youtube Channel
Related Manuals for Daktronics TI-2002
Summary of Contents for Daktronics TI-2002
- Page 1 TI-2002 PORTABLE LED TIMER DISPLAY MANUAL P1152 DD1847112 Rev 03 13 December 2019 201 Daktronics Drive Brookings, SD 57006-5128 www.daktronics.com/support 800.325.8766...
- Page 2 Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
-
Page 3: Table Of Contents
Setting the Driver Address ���������������������������������������������������������������������������������������������������������������7 Segmentation & Digit Designation .....................7 Schematics ............................8 Replacement Parts ..........................8 Daktronics Exchange and Repair & Return Programs ������������������������������������������������������9 Exchange Program ..........................9 Repair & Return Program ........................10 Daktronics Warranty & Limitation of Liability ...................10 A Reference Drawings �����������������������������������������������������������������������������������������������������������11 Daktronics Warranty &... - Page 4 This page intentionally left blank.
-
Page 5: Introduction
Figure 1: Specifications Label Please have the assembly number, model number, and the date manufactured on hand when calling Daktronics customer service to ensure the request is serviced as quickly as possible. Knowing the facility name and/or job number will also be helpful. -
Page 6: Resources
Reference Drawing: System Riser Diagram ..................DWG-1007804 Daktronics identifies manuals by the DD or ED number located on the cover page. Ensure all applicable materials have been gathered before beginning the installation. Contact a Daktronics sales coordinator or project manager. -
Page 7: Product Safety Approval
Product Safety Approval Daktronics portable LED timers are ETL-listed and tested to CSA standards for indoor use. Contact Daktronics with any questions regarding the testing procedures. Specifications TI-2002 displays require a 120-240 VAC, 15 Amp circuit. Dimensions: Power Driver #... -
Page 8: Mechanical & Electrical Installation
Mechanical Installation Daktronics portable TI-2002 timers may simply be placed on a table, counter, or floor. The TI-2002 also has a handle for easy transport as well as two keyholes on the rear of the display for hanging on a wall. -
Page 9: Troubleshooting
Troubleshooting Disconnect power before doing any repair or maintenance work on the display� Permit only qualified service personnel to access internal display electronics. Disconnect power when not using the display� Troubleshooting Table This section lists potential problems with the system, indicates possible causes, and suggests corrective action. -
Page 10: Component Location & Access
Component Location & Access Reference Drawings: Mechanical/Electrical Specs- TI-2002 .............. DWG-138314 To access the driver, digits, or other internal components, use a screwdriver to loosen the two screws on the front of the display, and remove the front panel. Refer to DWG-138314 in Appendix A for component locations. -
Page 11: Replacing A Driver
The TI-2002 uses Address 97. This address is set with jumper wires in a 12-pin plug which mates with jack J19 on the driver (Figure 4). -
Page 12: Schematics
Signal cable, 1/4" phone, 20' W-1236 Signal cable, 1/4" phone, 50' W-1237 Signal cable, 1/4" phone, 10' W-1340 Signal cable, 1/4" phone, 100' W-1381 Refer to Section 4: Daktronics Exchange and Repair & Return Programs (p�9) for information on exchanging or returning parts. Troubleshooting... -
Page 13: Daktronics Exchange And Repair & Return Programs
Fill out and attach the enclosed UPS shipping document. c� Ship the part to Daktronics. 3� The defective or unused parts must be returned to Daktronics within 5 weeks of initial order shipment� If any part is not returned within five (5) weeks, a non-refundable invoice will be presented to the customer for the costs of replenishing the exchange parts inventory with a new part. -
Page 14: Repair & Return Program
Repair & Return Program For items not subject to exchange, Daktronics offers a Repair & Return Program. To send a part for repair, follow these steps: 1� Call or fax Daktronics Customer Service� Refer to the appropriate number in the chart on the previous page. -
Page 15: A Reference Drawings
Any contract-specific drawings take precedence over the general drawings. Reference Drawings: Segmentation, 7 Segment Bar Digit ..............DWG-38532 4 Column LED Driver II; Specifications .............. DWG-123783 Mechanical/Electrical Specs- TI-2002 .............. DWG-138314 Schematic; LED Driver II Plate w/XMFR; 4-Column ......... DWG-157795 Reference Drawings... - Page 16 This page intentionally left blank.
- Page 19 THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS DRAWING ARE CONFIDENTIAL AND PROPRIETARY. DO NOT REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN CONSENT OF DAKTRONICS, INC. COPYRIGHT 2013 DAKTRONICS, INC. STANDARD INDOOR LED SCOREBOARDS MECHANICAL/ELECTRICAL SPECS- TI-2002 E REBHAHN...
-
Page 21: B Daktronics Warranty & Limitation Of Liability
Daktronics Warranty & Limitation of Liability This section includes the Daktronics Warranty & Limitation of Liability statement (SL-02374)� Daktronics Warranty & Limitation of Liability... - Page 22 This page intentionally left blank.
- Page 23 Warranty Coverage. Daktronics warrants to the original end user (the “End User”, which may also be the Purchaser) that the Equipment will be free from Defects (as defined below) in materials and workmanship for a period of one (1) year (the “Warranty Period”). The Warranty Period shall commence on the earlier of: (i) four weeks from the date that the Equipment leaves Daktronics’...
- Page 24 In no event shall Daktronics be liable for loss, damage, or injury of any kind or nature arising out of or in connection with this Warranty in excess of the Purchase Price of the Equipment. The End User’s remedy in any dispute under this Warranty shall be ultimately limited to the Purchase Price of the Equipment to the extent the Purchase Price has been paid.
- Page 25 For End User’s protection, in addition to that afforded by the warranties set forth herein, End User may purchase extended warranty services to cover the Equipment. The Extended Service Agreement, available from Daktronics, provides for electronic parts repair and/or on‐site labor for an extended period from the date of expiration of this warranty. Alternatively, an Extended Service Agreement may be purchased in conjunction with this Warranty for extended additional services.
- Page 26 This page intentionally left blank.
Need help?
Do you have a question about the TI-2002 and is the answer not in the manual?
Questions and answers