Hisense WFDJ60101 User's Operation Manual page 33

Ensure that:
All connections are tightly fixed.
Do not allow children to operate, crawl on, be near or inside your washer. Note that
during the wash cycles, the surface temperature of the porthole d o o r m a y increase.
Close supervision of children is necessary when the appliance is used near children.
Fault description table
Displayed on Display Window Fault Description
"F01"
"F03"
"F04", "F05", "F06", "F07"，"F23"
and "F24"
"F13"
"Unb"
a."F01" displayed on screen
The machine is not fed with water or insufficient water. Check:
Faucet is fully open and has enough water pressure.
Water inlet pipe is knotted or not.
Filtering net of water inlet pipe is blocked or not (refer to maintenance and repair).
Water pipe is frozen or not.
Press "Start/Pause" key after fault is removed.
If fault occurs again, please contact with after-sale service (refer to after-sale service.).
b."F03" displayed on screen
The washer is not emptied. The washer stops the program being executed. Shut down
the machine and disconnect power supply. Check:
Drain pipe is knotted or not.
Filter in drain pump is blocked or not (refer to the cleaning
of filter in drain pump)
IMPORTANT:
The drain hose is frozen up.
Plug in the appliance again. If the fault persists, unplug the appliance and contact After-
Sales Service(see "After-Sales Service" ).
28
Ensure that the water has cooled before drainning the appliance.
Water inflow fault
Drainage fault
Electronic module fault, overflow or too much
foam.
Door lock fault
Unbalance alarm