Download Print this page

Bosch Professional GBH 18V-28 CF Original Instructions Manual page 14

Hide thumbs Also See for Professional GBH 18V-28 CF:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
14 | English
– Set the rotational direction for chiselling to clockwise.
Status indications
Battery charge indicator
Meaning/cause
(user interface) (22)
Green (2 to 5 bars)
Battery charged
Yellow (1 bar)
Battery almost empty
Red (1 bar)
Battery empty
Power tool status
Meaning/cause
indicator (29)
Green
Status OK
Yellow
Critical temperature has been reached or re-
chargeable battery is almost empty
Red
Power tool has overheated or rechargeable
battery is empty
Red
Motor is jammed, battery too weak
General error
Flashing red
Rapid shut-off is triggered
Flashing blue
Power tool is connected to a mobile device via
Bluetooth
or
settings are being transferred
Smartphone symbol (28)
Meaning/cause
white
Important information available (e.g. temper-
ature warning)
Selecting the working mode
Press the (26) button for selecting the working mode re-
peatedly until the working mode you require lights up.
Working mode (25) indic-
Functions
ator
In Auto working mode, the power tool reaches maximum performance with maximum ramp-
Maximum perform-
up speed.
ance indicator (27) lights up
In Favorite working mode, the performance and ramp-up speed of the power tool can be indi-
Speed config-
vidually configured via a smartphone app.
uration via smartphone app
indicator (23) lights up
In Soft working mode, the performance and ramp-up speed of the power tool are reduced.
Reduced perform-
ance indicator (24) lights up
1 609 92A 8H0 | (27.03.2023)
User interface (see figure L)
The user interface (8) is used to select the working mode
and to indicate the status of the power tool.
®
Note: In Favourite working mode, the functions are con-
figured via the smartphone app, while the functions are pre-
set in Auto and Soft working modes.
Solution
Replace or charge battery soon
Replace or charge battery
Solution
Allow the power tool to cool down, or replace
or charge the battery
Allow the power tool to cool down, or replace
or charge the battery
Charge the battery or use the recommended
battery type
– Turn the power tool off and on again, or re-
move the battery and reinsert it
If the error persists:
– Send the power tool to the after-sales ser-
vice
Turn the power tool off and on again
Solution
Read the message on the smartphone
Bosch Power Tools

Advertisement

loading

This manual is also suitable for:

Professional gbh 18v-28 c