Descaling The Appliance - Breville the HydroPro Manual

DESCALING THE APPLIANCE

To descale the appliance, prepare a cleaning
solution by pouring equal amounts of water
and vinegar into a bath.
Secure the appliance in the bath, and select
the 'descale cycle' under the help section
(into 'Settings' menu).
WARNING
Do not descale with anything other than
vinegar.
REMOVING FOOD DEBRIS
Turn the immersion circulator OFF by
pressing and unplug from the electrical outlet.
WARNING
To avoid the potential for burns, allow
the immersion circulator to cool to room
temperature before removing it from the
cooking vessel.
In the unlikely event that food or other debris
becomes lodged in the pump impeller, remove
the foot and impeller from the unit and wash
carefully to remove any foreign objects.
Use a soft brush to remove any lodged
particles. If necessary, soak in clean water to
soften before brushing. DO NOT use hard
utensils or abrasive pads to remove trapped
food debris.
WARNING
Never operate your immersion circulator
without the foot in place.
18