Descaling - Breville AquaStation LWA200BSS Instruction Book

Descaling

After regular use, hard water can cause
mineral build up in and on many of the inner
functioning components, reducing the water
flow, water temperature, power of the unit and
the taste of the water.
For safe and efficient operation of your purifier,
it is important to descale regularly.
Breville recommends conducting a descaling
cycle no longer than 6 month intervals.
DESCALE
6M
To assist, every 6 months , the LCD screen will
display a DESCALE alert.
Descaling is a 3 step process. Once the descale
DESCALE
6M
cycle is complete, 2 rinse cycles will follow.
DESCALE will flash on the LCD screen during
the entire process.
DESCALE
6M
DESCALE
1L
DESCALE
1. To descale, remove the water tanks from
the base and remove the filter. Discard any
remaining water in the water tank. FUNCTION
DESCALE
1L
1L
DESCALE
DESCALE
1L
DESCALE
FUNCTION
2. Place 100mLs of Breville descale solution or
DESCALE
1L
100grams of descale powder into the water
FUNCTION
tank and fill with tap water to the marked
1L
DESCALE line (1L). Reassemble the water
1L
tank to the base. Turn the FUNCTION dial
until the indicator reaches DESCALE.
*Descale solutions sold separately.
MAX
DESCALE
MIN
1L
20
DESCALE
1L
MAX
MAX
6M
1L
DESCALE
DESCALE
1L
1L
DESCALE
DESCALE
FUNCTION
1L
DESCALE
DESCALE
6M
1L
1L
3. Remove the drip tray and place a
FUNCTION
1L container under the spout. Press
FUNCTION dial to start the descaling
1L
cycle. DESCALE on the LCD screen with
DESCALE
begin to flash.
1L
DESCALE
DESCALE
MAX
MAX
1L
1L
MIN
DESCALE
MIN
4. Descaling is a 3 step process. Once the
descale cycle is complete, 2 rinse cycles
will follow. DESCALE will flash on the
FUNCTION
MAX
LCD screen during the entire process.
FUNCTION
MAX
During descaling, the 1L of water with
MIN
added solution will dispense from the tank 1L
1L
MIN
automatically. DESCALE will flash on the
LCD screen.
MAX
FUNCTION
NOTE
1L
MIN
DESCALE
DESCALE
Following the descaling solution, 1 & 2 will
appear on the LCD screen indicating each
1L
1L
rinse cycle.
FUNCTION
2
MAX
DESCALE
1L
1L MIN
5. Empty the 1L collection container and
discard any remaining descale solution
2
DESCALE
from the water tank. Fill water tank with tap
MAX
water to the MAX line.
1L
1L
MIN
FUNCTION
1L
FUNCTION
DESCALE
MAX
MIN
1L
1L
2
1L