To Directly Access A Desired Track; To Exchange Discs During Play; To Stop Play - Technics SL-PD887 Operating Instructions Manual

OPEN/CLOSE
DISC SKIP
To directly access a desired track
coc 5; GesPress the numeric button(s) to
select the track.
Track number
To select a track between 1 and 10:
Press the corresponding number on the
numeric button.
To select a two-digit track number over 10:
First press > 10, and then press the numbers
for the two digits.
For example; number 20:
Press >10, then 2, and then 0.
°
To exchange discs during play
While playing a disc, it is possible to change the other discs
without interrupting play.
@ Press OPEN/CLOSE to open the loading drawer.
Current disc
Discs which can be changed.
@ Press DISC SKIP to rotate the disc trays and exchange
the discs,
The carousel will move by one disc tray. Pressing again
moves the carousel in the opposite direction by two disc
trays.
@® Press OPEN/CLOSE to close the loading drawer.
lf you play a disc with the loading drawer open, discs other
than the current disc cannot be played.
P liluminates
To resume play
Press >.
To stop play
Press Ml.
The display will show the total number of
tracks and the total playing time of the current
disc,
Total number of tracks
Current disc Total playing time
The total playing time displayed includes the
silent sections between tracks. For this
reason, it may be a few seconds longer than
the playing time indicated on the disc.
To re-start play
Press >.
Do not move this changer with a compact disc inside the unit.
If a disc comes off the disc tray, it might be scratched or the
changer might become incapable of playing.
(Refer to "Cautions concerning the maving of this unit" on
page 18.)