Technics SL-PD887 Operating Instructions Manual page 18

18
CAUTION
Before moving the changer to another location, be sure to carry
out the "Preparations for moving the unit" described below.
Failure to do so will expose the compact discs and the changer to
the risk of severe damage.
Preparations for moving the unit
All of the discs must be removed so that the trays are completely
empty.
Use the following procedure.
@ Press POWER to switch on the unit.
(if there is a disc in the play section, it will be returned to the
disc tray at this time.)
Press POWER to switch off the unit.
POWER DISC SKIP
=
OPENICLOSE
BW AUDIO
No. of channels
Frequency response
Output voltage
Dynamic range
SIN
Total harmonic distortion
Wow and flutter
DA converter
Output impedance
Load Impedance
PICKUP
Wavelength
WS GENERAL
Power consumption
2 (left and right, stereo)
2—20,000 Hz, +1 dB
2-V (at 0 dB)
92 dB
100 dB
0.007% (1 kHz, 0 dB)
Below measurable limit
MASH (1 bit)
Approx.1 kQ
More than 10 kQ
780 am
For United Kingdom, Europe, Australia and N.Z. 12W
For others 14W
Power supply
For United Kingdom, Europe, Australia and N.Z. .
AC 50/60 Hz, 230-240 V
For others AC 50/60 Hz, 110 V/127 V/220 V/230-~240 V
Dimensions (W x H x D)
Weight
Note:
430 x 125 x 370 mm
4.6 kg
Specifications are subject to change without notice.
Weight and dimensions are approximate.
MASH is a trademark of NTT.
For United Kingdom
This apparatus was produced to BS 800.