Advertisement
Alignment & Adjustment
2-7-1 KEY Function
1. "7" Key : R-Select Key
Press to select RED color.
2. "8" Key : G-Select Key
Press to select GREEN color.
3. "9" Key : B-Select Key
Press to select BLUE color.
4. "+100" Key : R-Mute Key
Press to mute RED color.
5. "0" Key : G-Mute Key
Press to mute GREEN color.
6. "PRE-CH" Key : B-Mute Key
Press to mute BLUE color.
7. "3" Key : Cancel Key
Recalls the previous data during convergence Adjustment. (Recalls the last memorized data)
8. "INFO" Key : Test/Normal Key
Used for switching back to the Normal screen fter entering Convergence Mode while receiving a general input signal. Allows for
comparison between the Adjustment screen and the Normal screen during adjusment.
(Each press of the key will switch between modes.)
9. "4" Key : Line Shift Key
(Repeat Fine Adjustment (no indication) → Line Adjustment → Enter Mode)
- This key selects between line or movement, whole pattern movement, or individual quadrant movement.
: up/down/left/right, at the beginning of the Convergence Adjustment.
- Press the "4 " key 2 more times for fine Adjusment.
10. "2" Key : Factory Data Select Key
Press to call the factory default values.
11. "SOURCE" Key : H/V Direction Select Key
Press to switch the cursor direction horizontally or vertically.
12. "ADD/DEL" Key : Save Key
After the Convergence Adjustments are completed, press to save data.
13. "S-MODE" Key : Exit Key
After the Convergence adjustments are completed, press to exit to TV mode.
14. "MUTE" Key : Move Cursor Forward Key
Press to move the cursor right or down.
15. "∧,∨,+,-" Key : Convergence Picture Move Button
Use the Channel button (∧,∨) to adjust Convergence Data up/down and use the Volume buttons (+, -) for left/right
adjustment.
2-20
Samsung Electronics
Advertisement
