Table of Contents
Advertisement
BASIC OPERATIONS
Shortcut Menu
Shortcut
menu is the first OSD menu. Complete the following steps:
‡
Select the input source. Those input sources that are available are marked with the DOT
Note:
‡
For more information on making connections to external devices, refer to the "Connections" section.
‡
The OPS option is only available if the PC module is properly installed into the OPS slot of the IFP.
‡
Drag the backlight slider bar to the right or to the left to adjust the backlight level.
Note:
For comfortable viewing experience, you can enable Flicker Free function.
‡
Drag the low blue light slider bar to the right or to the left to adjust the low blue light level.
IMPORTANT!
Studies have shown that just as the ultra-violet rays can cause eye damage, the shortwave-
length blue light rays from displays can cause eyestrain, retina damage, and affect vision over
time. Optoma Low Blue Light is an eye protection feature that can reduce the blue light.
IMPORTANT!
For protecting your eyes against prolonged display use, we highly recommend you to do the following:
‡
‡
‡
‡
‡
Drag the volume slider bar to the right or to the left to adjust the volume level.
34
English
Let your eyes rest for 10 minutes after 2 hours of continuous use.
Roll your eyes upward towards your eyebrows, and then roll your eyes in a large circle
every few hours.
For every 20 minutes of display viewing, look into the distance for 20 seconds.
When your eyes get sore, close your eyes for a minute.
●
symbol.
Advertisement
Table of Contents
