Using The Device; Turning The Power On/Off - Optoma 5852RK User Manual

USING THE DEVICE

Turning the Power On/Off

Powering on
Note: After the power cord is properly connected, make sure the Power switch is set to ON (I).
Press the Power button to turn on the IFP. The LED indicator light turns white, indicating it is ready to use.
Note:
You can also press the
Powering off
Press the Power button for 3 seconds to turn off the IFP. Press OK at the prompt to turn it off immediately or wait
for 10 seconds until the IFP turns off automatically.
When the LED indicator light turns red, this indicates that the IFP has entered standby mode.
Note:
‡ You can also press the
‡ The IFP still consumes power when it is in standby mode. It is highly recommended to unplug the
power cord from the power outlet if the IFP will not be used for an extended period of time.
button on the remote control to turn on the IFP.
button on the remote control to turn off the IFP.
29
English