Advertisement
10
@ Adjust the level balance of each channel with the
Gain Knob.
xO
LINE
'MIC
GAIN
Adjust each channel so that the Overload Indicator
will not light.
O°
OVERLOAD
To prevent inconsistency of each channel balance
caused by moving the Channel Fader, use only the
Gain Knob for adjusting the balance of each channel
and use the Channel Fader only for Fade In or
Fade Out.
Set the sound imaging positioning with the Panpot
Knob of each channel.
When
feeding from stereo
source
(e.g. CD or
tape), use two channels, with the Panpot of the
left (L) output rotated fully counterclockwise and
the Panpot of the right (R) output fully clockwise.
(9) Make a desiered tone using the Treble and Bass
Knobs.
xo™
x"rté<s.
)
9)
-10
+10
~10
"+10
TREBLE
BASS
(0) Adjust the Master Faders depending on the level
of the external device.
15
opi
tt itt
mrad orlitrt
Cm
ita
of;
ri itt
moet
orb
rt id t Metts
L
MASTER
R
Advertisement
