Yamaha EM-95 Operating Manual page 3

Integrated mixer
Hide thumbs Also See for EM-95:
Table of Contents

Advertisement

SPECIFICATIONS
GENERAL SPECIFICATIONS
MAXIMUM OUTPUT POWER
100 watts into 4 ohms, or
65 watts into 8 ohms, continuous average sine wave (НМ5).
FREQUENCY RESPONSE
+ 1dB, 30 Hz to 10 kHz or
.
|
+1, —3dB, 20 Hz to 20 kHz, (BOW, 49)
(950 watts into 4 ohms.
TOTAL HARMONIC
Less than 0.5% 50 Hz to 15 kHz,
DISTORTION (THD)
Less than 0.296 91 kHz,
(950 watts into 4 ohms.
INTERMODULATION
Less than 0.5%, (70 Hz : 7kHz = 4 : 1)
DISTORTION
@50 watts into 4 ohms.
* HUM and NOISE
** _116dB Equivalent input noise;
(20 Hz to 20 kHz,
—38dB residual output noise, Master Volume
150 ohms source)
and one Input Volume at max.
—42dB residual output noise, Master Volume at max
and all Input Volume controls at min.
MAXIMUM VOLTAGE GAIN
77dB, Channel In to Speaker Out.
(Input Selectors set
51dB, Channel In to Line Out.
at Mic position).
47dB, Channel In to Record Out.
52dB, Aux In, Tape In to Speaker Out.
77dB, Phono In to Speaker Out.
48dB, Line to Speaker Out.
EQUALIZATION
BASS + 12dB $100 Hz, shelving.
TREBLE + 12dB @10 kHz, shelving.
CROSSTALK
—60dB @1 kHz, adjacent inputs.
ANALOG
DELAY
LINE
70 to 195 milliseconds, continuously variable,
and with variable feedback,
POWER REQUIREMENTS
US & Canadian models 120 volts, 50/60 Hz
General model
110, 130, 220 or 240 volts, 50/60 Hz
POWER
CONSUMPTIONS
US & Canadian models 160 watts
General model
270 watts
DIMENSIONS | 500mm W x 225mm D x 252mm Н
(19-11/16"W х 8-7/8"D x 9-15/16"H)
WEIGHT
13 kg (29 pounds)
*
Compensated with a —6dB/octave filter 612.47 kHz.
** [n these specifications, OdB is referenced to 0.775 volts RMS.
INPUT CHARACTERISTICS
INPUTS (1 ~ 5CH)
MIC
150 ~ ЗКО,
一 50dB (2.5mV)
一 22dB (62mV)
INST
|
Sources
-354В (14mV)
7dB (346mV)
Phone Jack
LINE
|
|
-204В (78mV)
+ 8dB (1.93V)
INPUTS (CH6)
PHONO
mag. cart.
一 50dB (2.5mV)
--224В (62mV)
2 x Pin Jack
LINE
БКО,
|
—20dB (78mV)
+ Вав (1.93V)
Phone Jack
FUNCTION
INPUTS
|
AUX
IN
5КО
—20dB (78mV)
Phone Jack
TAPE
IN
БКО
—20dB (78т\/}
2 x Pin Jack
OUTPUT CHARACTERISTICS
49 100W
Phone Jack
‫ه و م‬
| апар |-
|
ө
LINE OUT
'
1009
10КО & up
048 (775mV)
Phone Jack
REC, OUT
|
2.2КО
`
10kQ & up
-OdB (775mV)
Pin Jack
In these specifications, OdB is referenced to 0.775 volts RMS.
Specifications are subject to change without notice,

Advertisement

Table of Contents
loading

Table of Contents