Jpeg Interval; Night Mode; Digital Output - Toshiba SD-590E Owner's Manual

JPEG Interval

1) Press SETUP button.
2) Press / button to select the Video.
3) Press button, then the / button to select the JPEG
Interval.
4) Press ENTER button, then the
change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Aspect Ratio
TV System
Video Out
HDMI Resolution
HD
JPEG Interval
Off: Plays back one file at a time.
5 seconds: Plays back images in the form of a slide show
at 5 seconds interval.
10 seconds: Plays back images in the form of a slide show
at 10 seconds interval.
15 seconds: Plays back images in the form of a slide show
at 15 seconds interval.
Audio

Digital Output

Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press / button to select Audio.
3) Press button, then use the
Digital Output.
4) Press ENTER button, then use the
the output sound format.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
stereo format when you play a DVD recorded on the Dolby
Digital, MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
"Bitstream" if your amplifier supports "DTS".
Off: To disable Digital Output.
/ button to shift and
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analogue audio jacks,
: 16 : 9
select "PCM" or "Bitstream".
: Auto Fit
• If this DVD player is connected to a TV using HDMI,
: PAL
make sure to select "PCM".
: HDMI
Off
5 seconds
JPEG Mode
10 seconds

Night Mode

15 seconds
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialogue even in very low volume.
1) Press SETUP button.
2) Press
3) Press
Night Mode.
4) Press ENTER button, then use the
the On or Off mode.
5) Press ENTER button.
: PCM
6) Press SETUP button to exit the menu.
: Off
Note
Night mode is Dynamic Range Control (DRC) option for
analogue audio output.
/ button to select
/ button to select
Rating
Off
PCM
Bitstream
/ button to select Audio.
button, then use the / button to select
/ button to select
: PCM
Off
On
Parental Control
Set Password
: 8. Adult
35