Specifications - Milwaukee M18 FUEL ONE-KEY ONEID3 Operator's Manual

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is
•
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or
•
excessive temperature. Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
•
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range
instructions. Charging
temperatures outside the specified range may
damage the battery and increase the risk of fire.
SERVICE
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR IMPACT DRIVER
• Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
Use only sockets and other accessories spe-
•
and drivers. Other sockets and accessories might
shatter or break causing injury.
• Chemical Burn Hazard. Keep coin cell battery
away from children.
To reduce the risk of injury, when
WARNING
working in dusty situations, wear
appropriate respiratory protection or use a
suitable dust extraction solution.
Always use common sense and be cautious
•
when using tools. It is not possible to anticipate
every situation that could result in a dangerous
outcome. Do not use this tool if you do not
understand these operating instructions or you feel
the work is beyond your capability; contact
Tool or a trained professional for
MILWAUKEE
®
additional information or training.
Maintain labels and nameplates. These carry
•
important information. If unreadable or missing,
contact a MILWAUKEE
replacement.
specified in
improperly or
service facility for a
®
WARNING
other construction activities contains chemicals
known to cause cancer, birth defects or other repro-
ductive harm. Some examples of these chemicals
are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
the
them. Corrosive or conductive fluids, such as
at
seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
WARNING

SPECIFICATIONS

Cat. No. ............................................. M18 ONEID3
Volts ........................................................... 18 V DC
Battery Type .................................................M18™
Charger Type ................................................M18™
RPM .......................................................... 0 - 3,900
IPM ........................................................... 0 - 4,400
Recommended Ambient
Operating Temperature .................... -17°C to 51°C
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
Read operator's manual.
Regulatory Compliance Mark (RCM).
This
regulatory requirements.
Do not dispose of electric tools
together
material. Electric tools and electronic
equipment that have reached the end
of
separately
environmentally compatible recycling
facility.
3
Some dust created by power sand-
ing, sawing, grinding, drilling, and
T o reduce the risk of fire, personal
injury , and product damage
Do not charge non-rechargeable
batteries.
SYMBOLOGY
product meets
with household
their life must
and returned
due to
applicable
waste
be collected
to an