Table of Contents
Advertisement
Setting
Timelight *
Infolight *
Start programme
Tone volume *
Button volume
Childproof lock *
Eco drying *
Greeting
Factory setting
* depending on the features of your dishwasher
--------
+
Water softening
system / special salt
To ensure good rinsing results, the
l t
s y s t e m / s p e c i a l s a
W a t e r s o f t e n i n g
dishwasher requires soft water, i.e.
water which is low in lime, otherwise
limescale will be deposited on the
utensils and interior container. Tap
water above 7° dH (1.2 mmol/l) must
be softened. The water is softened with
special salt (regeneration salt) in the
water softening system
of the dishwasher. The setting and
therefore the required amount of salt
depends on the degree of hardness of
your tap water (see following water
hardness table).
Factory setting
On
On
Eco 50°
Setting 2
Setting 2
Off
On
On
Confirm/Back
Water softening system/special salt en
Infotext
by pressing Info button {
While programme is running, status
information is projected onto floor.
Light is projected to signal an active
cleaning cycle.
When switching on, the last selected
programme appears.
Volume of signal at end of programme.
Volume when using buttons.
Activated child-proof lock impedes
opening of door.
Door opens automatically at the end of the
programme.
When switching on the appliance, the
brand logo can be deselected.
Resetting to the factory setting.
Water hardness table
15
Advertisement
Table of Contents
