Use Of The Nv-8200 With A Tv/Video Monitor - Panasonic NV-8200 Operating Instructions Manual

CONNECTION DIAGRAM
1. Connect the NV-8200 to your TV/VIDEO monitor as described in this section.
VTR-Monitor Connection Cable (supplied)
Audio Cabel
Coaxial Cable
Coaxial Cable
Audio Cable
Connection 1
Video Input Connector
Video Output Connector
Connection 2
TV/VIDEO Monitor
Note :
Use Connection 1 or Connection 2,
whichever is appropriate for your
TV/VIDEO monitor.
r
uxi
NI
I
T
r -
T 7 —
1
tt,
TV/VIDEO Monitor Connector üb -
Audio Monitor Output Jack
Audio Input Jack, Chl
AC Power Cord
To AC Outlet
VOL TAGE
SELECTOR
8 0
•
11
Rear of the recorder
USE OF THE NV-8200 WITH A TV/VIDEO MONITOR
SETTING THE VOLTAGE SELECTOR
NV-8200 recorder is preset to 200-220 V or 230-250 V
at the factory.
Before connecting to the power supply, ensure that
the selector an the rear should be selected to the
VOLTAGE SELECTOR saure voltage as your local power supply. NV-8200
can be used an either 100-110 V, 115-127 V, 200-
220 V or 230-250 V
AC.
Holder
To adjust the voltage setting proceed as follows:
1. Ensure that the mains lead is disconnected from
the mains supply.
2. Turn the fuse holder by using a thin driver.