Table of Contents
Advertisement
FINE
CH
Power ON
Select RF
Converter
channel
TV Set
RF CONVERTER (OPTIONAL ACCESSORY)
An RF converter (optional accessory NV-8200-E: ENC-17319-1, NV-8200-B: ENC-17318-1, NV-8200-A: ENC-17210)
will allow you to play back VHS signals into your TV receiver.
For this purpose those signals can be viewed through an unused broadcast channel.
If you want to use the RF converter (optional accessory), the monitoring from the video camera, audio player or the
microphone, or the playing back of the recorded tape (included the timer playback) can be made.
INSERTION
C) Remove the screws by using a screwdriver as
shown in the illustration.
2
Insert the RF converter into the converter slot as
shown in the illustration.
• Retighten the screws after the converter has been
inserted.
RF CONVERTER CHANNEL
Model NV-8200-E and -B
• The NV-8200 RF converter channel is preadjusted for
your convenience to UHF 36 (±3) channel.
Model NV-8200-A
• The NV-8200 RF converter channel is preadjusted for
your convenience to VHF channel 1.
If the playback picture shows a patterning interference
effect, it may be that the RF converter playback channel
requires. careful adjustment.
Due to the delicate nature of this adjustment it should be
undertaken by your dealer.
RF Con-
verter
Slot
RF Converter
(Illust. ENC-17319-1)
CONNECTION DIAGRAM
Connect the NV-8200 to the TV receiver as follows:
To AC Outlet
Advertisement
Table of Contents
