Optional Equipment; Optional Features; Printer For Operation; Power Connections - GE TermiNet 300 Operator's Manual

GEH-2184A
Operator's Manual
Automatic Send Receive (ASR)
This is a
KSR Tern1iNet 300 printer, with a paper
Ltp('
pllll<'h
and reader.
OPTIONAL EQUIPMENT
Tape Reader
A photoelectric tape reader is available which can
re ad at
10,
15, and 30 characters per second when used
with a printer, and can also send data at 120 char-
acters per second if tape reader options are included.
The tape reader is versatile in a number of ways.
It can be made to read or omit the next character,
word, or line by simply pushing the appropriate
buttonso The reader can also backspace and can be
reversed from either a remote or local location.
Tape Punch
A tape punch is available which operates at 10,
15, and 30 characters per second. The solenoid-
dri ven punch has no moving parts, except during
the punching operation. This reduces wear and
noise. The punch can automatically prepare a leader.
OPTIONAL FEATURES
Long Print Line
Tern1iNet 300 printers are available with 118
print positions for those applications where a long
print linP is required.
Pin Feed Platen
Pin feed platens are available for rapid and ac-
curate handling of business forms.
Answerback
Up to a 20-character n1essage can be supplied
in the answe rback option. This gives a ren1ote lo-
cation positive identification of another tern1inal
without requiring an operator to be present.
Horizontal Tab Set (1)
This feature allows either local or remote setting
of the tabs. The tabs can be set at all positions on
the print line. To set a tab move to the column po-
sition desired. Hold the escape key and depress the
Horizontal Tab Set key button. When the tabs are
set, the first tab position becomes the left-hand mar-
gin. To clear tabs, hold the Escape key and depress
the Horizontal Tab Clear key button. This will clear
all tabs.
4
Upper/Upper Lower Case Switch
This switch enables either upper case printing
only or nor1nal upper and lower case printing.
Additional Options Available Soon
Transparency Switch
Form
Feed
and Vertical Tabulation
Red and Black Ribbon
Charaqter Parity Detection
Parallel Interface
PREPARING THE TERMINET 300
PRINTER FOR OPERATION
POWER CONNECTIONS
Plug the double-ended power cord into the re-
ceptacle at the right rear of the machine and then
into a 115 volt a-c, grounded outlet. (See the Serv-
ice Manual for specifications and power require-
ments.)
Fig. 3. Power cable connections
N 0 TE:
A SJ~ }
II ()
rl ( )
f.....,·
I/(
II ' ( '
I
I
1 ( )
I I ' )
I ' ( )
11 (/ - ( .
outlet at Ille
ri,shl
r<'ur
c~/
ll1c rlcsll'.