Ozobot ORA Quick Start Manual page 10

Finally, connect the Power Supply and Ethernet Cable to
their data and power sources. See the figure below for an
overview diagram of hardware connection.
Note: Connect your ORA via Ethernet Cable to your local
area network (LAN). It is recommended to connect you
control computer via Ethernet Cable, as connecting over
Wi-Fi may result in delayed responses from the arm.
18 Setting Up ORA
Router
Computer
Connecting Blockly
Step 1
Power on ORA
Enable power to your ORA by switching ON the Power
Supply, and then twisting the Emergency Stop Button to the
right (until it clicks).
1
2
ORA Quick Start Guide — Connecting Blockly
Turn ON Power Supply.
Twist the button to turn
power ON to the arm.
19