True GDM-49-HC-TSL01 Installation Manual page 27

TRUE
glass door merchandisers
LAE Control
DISPLAYING TEMPERATURE PROBES, T1, T2, T3:
WHY: To display temperature probe readings in different locations of the cabinet.
HOW TO DISPLAY PROBE TEMPERATURES:
STEP 1 - To display T1 temperature, press and release the info button
. "t1" will appear. See image 1.
STEP 2 - Press and hold the info button
the T1 Probe. See image 2.
STEP 3 - By releasing the info button
the info button to display the temperature of the T2 probe.
STEP 4 - By releasing the info button
hold the info button
probe T3 is not activated, "t3" will not appear of the display.)
DISPLAY CODES
DISPLAY
Defrost in progress
Controller in stand-by
Door open alarm
Instant Probe 1 temperature
Instant Probe 2 temperature
Instant Probe 3 temperature
Minutes of the Real Time Clock
Hours of the Real Time Clock
. This is the temperature of
, "t2" will appear. Press and hold
again, "t3" will appear. Press and
to display the temperature of the T3 probe. (If
Info / Set Point
Button
Manual Activation
Up Button
Room high temperature alarm
Room low temperature alarm
Probe T1 failure
Probe T2 failure
Probe T3 failure
Maximum probe 1 temperature recorded
Minimum probe 1 temperature recorded
Keypad state lock
. .
www truemfg com
Manual Defrost /
Down Button
Stand-By
Button
1
2
26