Samsung HG55Q60AAAWXXY Install Manual page 31

Hotel Option menu Item
Channel Setup
Channel Editor
Mixed Channel Map
Channel
Dynamic SI
Channel Rescan Message
MyChannel
TTX Widescreen Mode
Broadcasting Sel
Picture Menu Lock
Menu Display
Channel Menu Display
Menu OSD
Panel Button Lock
Description
Gives you direct, immediate access to some of the channel menu functions on the
Broadcasting menu such as Auto Tuning, Programme Rating Lock, Audio Options,
etc.
Lets you edit the channels stored in the TV's memory.
• Change the channel numbers and names, manage genre and language groups
and delete channels.
• Apply the Screen Off to channels you select. The Screen Off blanks out the video
from a channel and outputs only audio.
• Lets you view information about each channel easily, without your having to
display each channel directly.
Enables showing/browsing all antenna type (Aerial/Cable) channels at the same
time.
• ON: When set to on, guests can access the complete channel map irrespective of
the selected antenna type. The Channel List/Channel Editor will also populate
Aerial as well Cable type channels.
• OFF: When set to off, guest can access the channel map corresponding to the
selected antenna type (Aerial/Cable) only. The Channel List/Channel Editor will
only show the selected antenna type channels.
• ON: Do not check the DTV programme channel number.
• OFF: Check the DTV programme channel number.
When there is a mismatch between the data in the channel map and the transmitted
data, the TV autotunes the channels to restore the data/parameters in the channel
map.
• ON: When Channel Rescan Message is set to on, the OSD showing that the
channels are being rescanned will be displayed to the guest.
• OFF: When Channel Rescan Message is set to off, if the rescan message OSD
should not to be displayed to the guests.
Enable or disable the MyChannel function.
• This function is not available when set to Hospitality Mode: Standalone.
• ON: TTX should show in 16:9 picture size.
• OFF: TTX should show in 4:3 picture size.
• DVB-C 6MHz: Receives 6 MHz bandwidth broadcast signals for cable DTV (DVB-C).
• DVB-C 8MHz: Receives 8 MHz bandwidth broadcast signals for cable DTV (DVB-C).
If you change the function value, data in such as the channel list and the channel map
may be reset. In this case, you must run Auto Tuning again.
Enable or disable the Picture menu.
• ON: The main menu is displayed.
• OFF: The main menu is not displayed.
• ON: Broadcasting menu is enable for guest.
• OFF: Broadcasting menu is disable for guest.
Turning the TV Controller button operations on or off.
• Unlock: Unlocks TV Controller button.
• Lock: Locks TV Controller button.
• OnlyPower: Locks TV Controller button except the power off function.
English - 31